Complete EBACS (Electronic Battery Analyzer/Charging System)
The same analyzer and software as the EBA built in with a dedicated PC and charger. This allows for charging a power supply/battery while testing and monitoring another one.
BROWSE OUR TEST BOXES
Capacitance Test Equipment
The same analyzer and software as the EBA built in with a dedicated PC and charger. This allows for charging a power supply/battery while testing and monitoring another one.
A computer managed test box designed specifically for performing capacitance tests on various emergency power supplies and emergency batteries.
A simple, manually operated test box designed to perform the capacitance test on PS-835, PS-850 & PS-855 power supplies.
No need to remove the emergency lighting power supplies from a Cessna 680 Sovereign to perform a capacitance test.
Designed specifically to perform an operational test and capacitance test of the BFGoodrich/L3 Communications PS-834 standby power supplies. Frequently used in Cessna 525 Citation Jet and Piper PA-46 Malibu aircraft.
This test box is used to perform an operational test and capacitance test of the Grimes 60-3157-1 emergency power supplies often found in older Beech 400, Mitsubishi Mu-300 and Airbus 300 series aircraft.
Designed to perform the system check and standby power supplies capacitance test on Beechjet 400 aircraft with the BFGoodrich power supplies still installed in the aircraft. These are mounted underneath the cabin floor.
“As an avionics tech with over 28 years of experience, I can say that these test boxes are some of the best in the industry.”
Avionics Tech at FAA Certified Repair Station
Landing Gear Test Equipment
The ShockBox® Landing Gear Breakout Box has been designed to be universal by adding a harness built specifically for your aircraft model to give you a powerful troubleshooting and rigging tool for your shop.
Designed straight from the King Air Maintenance Manual for aircraft with factory installed hydraulically controlled landing gear. It aids in the rigging of the nose gear actuator limit switches.
Designed straight from the King Air Maintenance Manual for aircraft with factory installed hydraulically controlled landing gear. It aids in the rigging of the main gear actuator limit switches.
Task Specific Test Equipment
If you are looking for the test box required to perform the Inverter System Test & Troubleshooting as described in chapter 24-21-00 of the Diamond 1/1A Mu300 Maintenance Manual, we have it!
This test box is required to perform the “Fire Detection System Functional Test” as described in chapter 26-20-00 of the Beech 400/400A Maintenance Manual, that is required during a “C”-check inspection.
Our Grimes strobe power supply test box contains equivalent to Grimes G0056 Discharge Load Tester and G0047 Functional Tester in a single unit. Utilize our test box along with your Grimes Component Maintenance Manual to troubleshoot and repair these power supplies.
To aid in troubleshooting Grimes strobe systems when you aren't sure if you have a bad strobe or a bad power supply. Disconnect the inoperative strobe and connect our test strobe. If the test strobe doesn't work, then you probably have a power supply problem.
This box is required to perform Task 32-00-00-760-801 “Landing Gear Limit Switches – Electrical Test” as part of the ”B, C & D Inspections” in the Piaggio P180 Avanti Maintenance Manual (Report No. 9066). This test box is built to meet or exceed the design of the Piaggio Aerospace TEM-326000-001 Test Box.
AT YOUR SERVICE
Our customers are from all over the world. We can ship to your repair shop.
No more shipping off parts to be tested. Your aircraft can return to service within a few hours.
For Charter Operations and Aircraft Repair Stations who want to bring their testing in house and reduce costs.
Backed by a one year warranty against manufacturing defects. You can count on quality test equipment.
Reduce your aircraft down time with ShockBox®.
Testing Equipment
Company Info
COPYRIGHT 2024 © ET MECHANICAL, LLC, SHOCK BOX
For over 10 years we at ShockBox® have strived to build the highest quality test equipment at an affordable price.
Our standards have remained the same but the cost of components has not.
Therefore, effective July 6th, 2022, our product prices will increase. Any sales orders before this date will be honored at current pricing.